ZHEJIANG FUJI ELEVATOR CO.,LTD
FUJI ELEVATOR
Add to Cart
Safety Airport Floor Escalator With Tempered Glass Balustrade Panel
Standard Function For Moving Walk
| Standard function | Optional function | ||
| 1 | Broken drive-chain safety device | 1 | Skirt protection device |
| 2 | Error, break phase protection | 2 | Handrail speed monitor |
| 3 | Broken step-chain safety device | 3 | Comb lighting |
| 4 | Handrail inlet and exit protection | 4 | Handrail lighting |
| 5 | Working brake | 5 | Traffic lights |
| 6 | Emergency stop button | 6 | Water level detection |
| 7 | Direction reversal protection | 7 | Automatic drainage |
| 8 | Comb protection device | 8 | Smoke detection |
| 9 | Automatic oiling | 9 | PSM function |
| 10 | Step subsidence safety device | 10 | Comb heating |
| 11 | Motor over-load protection | 11 | Truss heating |
| 12 | Over-speed protection | 12 | Automatically start(add traffic lights) |
| 13 | Ground Protection of safety circuit | 13 | Two steps leveling change to three steps |
| 14 | Step illumination | 14 | Frequency (5.5KW, 8.0KW, 11KW,15KW) |
Notes
1. When the operating environment temperature under 0 (outdoor or semi-outdoor)
need increase heater.
2. Sufficient unblocked space is needed at entrance and exit of moving walk and the width should be the center distance at east. the depth(from handrail turn
end) should be 2.5m at least, this area width should more than two times of the handrail
center distance, the depth can be reduced to 2m.
3. if have the pit should have waterproofing work(self-care by user).
4. the distance between moving walk and any barrier should 500, or the Triangle place of handrail and floor should install protecting board(self-care by user).
5. user provide power supply and earth connection equipment with resistance less than 4 ohm, it should leave Two meters left margin line under the upper supporting beams, motor capacity according to left form.
6. Luminance at least should be50Lx at entrance and exit of indoor moving walk, luminance at least should be 15Lx at entrance and exit of outdoor and semi outdoor(self-care by user).
7. If the middle supporting beam use steel frame structure, please ask Hengda Fuji Elevator Company for
advice.
8. two sides and bottom decoration of moving walk self-care by user.
Technical notes
| Technical notes | ||
| Dip angle | 0-6degree | |
| Speed V | 0.5m/s | |
| Pedal V |
Aluminium alloy (indoor /half outdoor /complete outdoor ) |
|
| Pedal With A | 1000 | |
| Hanrail center distance B | 1238 | |
| Moving walk outside width C | 1600 | |
| Machine supporting beam length D | >1660 | |
| Installation place/drive mode | Length L1 | |
| Indoor/star delta | 4000 | 4000 |
| Indoor/frequency | ||
| Semi-outdoor/star delta | ||
| Seim-outdoor/frequency | 4600 | |
| Outdoor/star delta | 4000 | |
| Outdoor/frequency | 4600 | |
|
Power supply |
||
FAQ
1. Why to choose your factory?
We have done these decades before,so we have rich experience. We can provide you the high-quality products with the best price.
2. What is the valid of your price?
Because the cost and exchange rate changes rapidly, so all of our quotation for you is with 30 day valid. If you need any update price, please feel free to contact us.
3. How long can you arrange delivery?
About 30 days after we received the deposit (30% by T/T in advance, 70% by T/T or L/C before shipment), all the machines will be ready. You are welcomed to test the machine in my factory or we send you video of your machine running.
4. What documents can you provide me for Customs clearance?
We will provide you with usual documents: Commercial Invoice, Packing List, BL. The other
documents also can be provided upon request.